METAL LUBE 4T HUMID CLUTCH FORMULA

Formula Metal Lube for 4-stroke motorcycles with wet clutch, a treatment that offers the most power to our motorcycle.
The higher specific power (CV / cc) of the bikes, the specific requirements of the clutch discs and the high loads that occur between the teeth of the gears in the increasingly compact gearboxes, force oil to withstand greater efforts that those made in the automobile.
This formulation is designed for this type of engines, where the treatment has to guarantee the maximum reliability of the engine and the best mechanical response of the gearbox, at the same time, in the clutch no skids occur between the discs, in order that they transmit the power efficiently, gradually and without overheating.
METAL LUBE, drastically reduces friction, wear, heat, noise and vibration of the engine, will improve engine response and acceleration, it will also reduce fuel and oil consumption.
INSTRUCTIONS:
Add METAL LUBE to the engine oil pan, it is not necessary to remove oil. It can be used with new or used oil. Engines with up to 4 liters of oil, put a complete container of 120 ml., With up to 2 liters of oil put the container of 60 ml., Engines with less capacity of oil, mix 30 ml. for each liter of oil.
In Competition Motors: Repeat the application every 3 oil changes.
Street motorcycles: every 50,000 km or 1,000 hours.
This formulation can be used both in engines with oil-coated clutch and dry-clutch.