METAL LUBE GEARS AND CARDAN
Next
![METAL LUBE ENGRANAJES Y CARDAN](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 125 145" width="125" height="145"></svg>)
METAL LUBE 4T HUMID CLUTCH FORMULA
Previous
The joint lubrication system of the engine + wet clutch + transmission, forces the oil to continuous efforts that result in high temperatures, which at the same time generate more waste than those produced in automobile engines. The internal cleaning in this type of engines must allow the clutch to be free of debris and be able to perform its work in an efficient way, without skidding.
The cleaning agents of the Engine Clean MotorCycle 4-T formula, when introduced into the engine, reach the places that the oil normally can not reach.
Dissolves dirt throughout the lubrication circuit. Eliminates waste, scale and carbon. Release segments. Tappets, oil pump, distribution, valves and crankshaft, will be free of waste.
INSTRUCTIONS
With the engine warm and before emptying the used oil, add this 120 ml container. in the engine crankcase. Keep the engine running at idle for 15 minutes (engines cooled by air with 10 minutes is sufficient). After this process, remove all the oil leaving it to drain. Change the oil filter. Add new oil. It is recommended to repeat the application every three oil changes.
INDICATIONS:
You can use it on all types of 4-stroke engines. Especially in those where the clutch discs are bathed in oil. The content of this container is sufficient for engines with a capacity of up to 4 liters of oil.
CAUTION:
Use in ventilated areas only.
METAL LUBE 4T HUMID CLUTCH FORMULA
Previous
METAL LUBE INTERNAL CLEANING MOTORS
€8.02
In stock
Reference
A4EC
Shipping 24h/48h
For orders before 3 p.m.
Specialist Workshop
BMW, DUCATI, KTM, MV AGUSTA, TM, MOTO MORINI, BETA
Official Dealer
MOTO MORINI, TM RACING, BETA, RIEJU
Visit our store
Hours from 9 a.m. to 1 p.m. and from 4 p.m. to 8 p.m.
The joint lubrication system of the engine + wet clutch + transmission, forces the oil to continuous efforts that result in high temperatures, which at the same time generate more waste than those produced in automobile engines. The internal cleaning in this type of engines must allow the clutch to be free of debris and be able to perform its work in an efficient way, without skidding.
The cleaning agents of the Engine Clean MotorCycle 4-T formula, when introduced into the engine, reach the places that the oil normally can not reach.
Dissolves dirt throughout the lubrication circuit. Eliminates waste, scale and carbon. Release segments. Tappets, oil pump, distribution, valves and crankshaft, will be free of waste.
INSTRUCTIONS
With the engine warm and before emptying the used oil, add this 120 ml container. in the engine crankcase. Keep the engine running at idle for 15 minutes (engines cooled by air with 10 minutes is sufficient). After this process, remove all the oil leaving it to drain. Change the oil filter. Add new oil. It is recommended to repeat the application every three oil changes.
INDICATIONS:
You can use it on all types of 4-stroke engines. Especially in those where the clutch discs are bathed in oil. The content of this container is sufficient for engines with a capacity of up to 4 liters of oil.
CAUTION:
Use in ventilated areas only.